It is abrasives of fast and economical and safe method that remove burr at parts and product production, wild surface, flash and various pollutants efficiently in increasing metal, nonferrous metal, electricity electron, ceramics, rubber, vessel, car and each field of industry such as aircraft that see that this firm develops.

Also, will not give original special quality of target quality of the material or dimensional change of detailed product and reduction, damage of surface and may contribute by economical efficiency such as mass production and cost of production decrease and elegant quality of goods and uniformization of product using at before and behind processing process of product.

Uses method is soft instead of using similar and strong projection material with Sand Blast or Shot Blast and recycling number of times is used by low pressure of 14-40 PSI by a lot of plastic abrasiveses.

Called this plastic abrasives improves grace of your company product and add refinement Watch of the product by fast and economical and safe method in difference of noxious chemical Stripper and manual processing etc. to blasting site that environmental pollution does not exist entirely by avirulent 'Plastic grit'.

There is, MELAMINE MEDIA, UREA MEDIA, ACRYLIC MEDIA etc. by several products that this firm develops and produces. This plastic abrasives paint, powder coating, sealants, time of rough surface (burrs), dust, soot etc. to projecting data used to very quick exclusion and also undercoating (primer) that is painting is surface treatment to do very excellently into inexpensive every industries of after get salted in processing.

Below are suggested applications for plastic media blasting:


  • Aircraft paint removal:
  • Removes most types of paint from typical aircraft substrates, while leaving anodized and alclad surfaces intact. Is employed on a wide variety of off-aircraft components - resulting in significant savings over chemicals.
  • Burr removal：
  • Removes light burrs from components while maintaining integrity of finished part.
  • Composite Structures：
  • Can strip paint and surface coatings from fiberglass, carbon-graphite, epoxy, and other resin rich components without bloom or fiber damage.
  • Electronics deflashing：
  • Used both in dry and wet blast to remove flash from electronic components and for surface preparation of PCB's.
  • Engine components：
  • Carbon deposits and paint can be easily dry stripped with no wear to critical mechanical dimensions, including aluminum parts.
  • Lead frames：
  • Prepares lead for easier and more uniform tinning and coating procedures. Removes resin bleed without impinging surface.
  • Paint rejects:
  • Can be substituted for chemical stripping. In many applications, major time savings can be realized. Effective on most paint systems including powder coating.
  • Surface preparation:
  • Etching circuit boards before printing. Pre-laminate roughening. Prepaint surface prep on plastics.
  • Boats：
  • Bottom paint stripping from aluminum, fiberglass and dense hardwood hulls. Rapid removal of dried barnacles. Cleans brass of oxides and other coatings. Detects and exposes blisters on fiberglass hulls.
  • Clear epoxy optical sensors:
  • Only media capable of removing resin bleed without opaquing surface. Eliminates individual time-consuming masking requirements.
  • Die Casting:
  • Removes light flash from cast components without affecting critical surface dimensions.
  • Encapsulated electronic parts：
  • Will not damage delicate parts or mar surfaces. Leaves product surface smear free, ready for identification printing or soldering.
  • Ground vehicle paint removal:
  • Paint is readily removed from auto, truck, railcar, and bus bodies.
  • Mold cleaning:
  • Readily cleans molds used in rubber, plastic, glass, and die cast molding without affecting surface dimensions. Edges are not radiused, mold life is prolonged, cracks in molds are not smeared over, and flash on parts is reduced.
  • Plastic molded parts：
  • Effectively removes flash from parting lines on thermoset plastic parts. Removes surface anomalies without damage to the part.
  • Surface sealants:
  • Tenacious sealants and adhesives can be safely removed without damage to the substrate.
ADD： No.322,Sec.1,Zhongshan W. Rd.,Xinwu Township.Taoyuan County 327, Taiwan
Tel：886-3-477-3668 Fax：886-3-477-1398 E-mail：fina@tomo-blast.com.tw Website：www.tomo-blast.com.tw