• TYPE：I
  • Material：Polyester
  • Shape：Irregular
  • Specific Gravity:1.31-1.43
  • Mohs Hardness : 3
  • Standard
  • TPO 12/16 (1.70 - 1.20mm)
  • TPO 16/20 (1.20 - 0.85mm)
  • TPO 20/30 (0.85 - 0.60mm)
  • TPO 30/40 (0.60 - 0.43mm)
  • TPO 40/60 (0.43 - 0.25mm)
  • TPO 60/80 (0.25 - 0.18mm)
  • TPO 60/100 (0.25 - 0.15mm)
  • TPO 80/100 (0.18 - 0.15mm)
  • ＊ Various standard production by any order

softest type

Electronics: light deflashing and deburring of encapsulated circuits.
Soft metals and fiberglass: paint, primer and contamination stripping.

  • TYPE：II
  • Material：Urea
  • Shape：Irregular
  • Specific Gravity:1.45-1.50
  • Mohs Hardness : 3.5
  • Standard
  • TUR 12/16 (1.70 - 1.20mm)
  • TUR 16/20 (1.20 - 0.85mm)
  • TUR 20/30 (0.85 - 0.60mm)
  • TUR 30/40 (0.60 - 0.43mm)
  • TUR 40/60 (0.43 - 0.25mm)
  • TUR 60/80 (0.25 - 0.18mm)
  • TUR 60/100 (0.25 - 0.15mm)
  • TUR 80/100 (0.18 - 0.15mm)
  • ＊ Various standard production by any order

more aggressive than Type I.
Fastest practical media for stripping aircraft, trucks, trailers, tractors, rail cars, vans, motor homes, marine vessels, cars, buses.
Approved by U.S. Air Force for stripping air frames

  • TYPE：III
  • Material：Melamine
  • Shape：Irregular
  • Specific Gravity:1.47-1.52
  • Mohs Hardness : 4
  • Standard
  • TME 12/16 (1.70 - 1.20mm)
  • TME 16/20 (1.20 - 0.85mm)
  • TME 20/30 (0.85 - 0.60mm)
  • TME 30/40 (0.60 - 0.43mm)
  • TME 40/60 (0.43 - 0.25mm)
  • TME 60/80 (0.25 - 0.18mm)
  • TME 60/100 (0.25 - 0.15mm)
  • TME 80/100 (0.18 - 0.15mm)
  • ＊ Various standard production by any order

most aggressive, fastest-acting type. Replaces glass beads and other harsh abrasives.
Mold cleaning; difficult-to-remove paints and primers from hard materials such as engine parts, turbine blades, molds

  • TYPE：V
  • Material：Acrylic
  • Shape：Irregular
  • Specific Gravity:1.15-1.20
  • Mohs Hardness : 3.2-2.5
  • Standard
  • TAC 12/16 (1.70 - 1.20mm)
  • TAC 16/20 (1.20 - 0.85mm)
  • TAC 20/30 (0.85 - 0.60mm)
  • TAC 30/40 (0.60 - 0.43mm)
  • TAC 40/60 (0.43 - 0.25mm)
  • TAC 60/80 (0.25 - 0.18mm)
  • TAC 60/100 (0.25 - 0.15mm)
  • TAC 80/100 (0.18 - 0.15mm)
  • ＊ Various standard production by any order

longest lasting type
For stripping aircraft structures, trucks, trailers, tractors, rail cars, vans, motor homes, marine vessels, cars, buses.
Considerably “more forgiving” in hands of operator.

  • TYPE：VI
  • Material：Poly Allyl DiGlycol Carbonate
  • Shape：Irregular
  • Specific Gravity:1.30-1.35
  • Mohs Hardness : 3
  • Standard
  • TPCG 12/16 (1.70 - 1.20mm)
  • TPCG 16/20 (1.20 - 0.85mm)
  • TPCG 20/30 (0.85 - 0.60mm)
  • TPCG 30/40 (0.60 - 0.43mm)
  • TPCG 40/60 (0.43 - 0.25mm)
  • TPCG 60/80 (0.25 - 0.18mm)
  • TPCG 60/100 (0.25 - 0.15mm)
  • TPCG 80/100 (0.18 - 0.15mm)
  • ＊ Various standard production by any order

Outstandingly effective for paint stripping of Corvettes and other composites; also preserves surface profile of delicate metal parts.

...TOP...
ADD： No.322,Sec.1,Zhongshan W. Rd.,Xinwu Township.Taoyuan County 327, Taiwan
Tel：886-3-477-3668 Fax：886-3-477-1398 E-mail：fina@tomo-blast.com.tw Website：www.tomo-blast.com.tw